Foger Vape Charger
// TL;DR
The Foger vape charger is a USB-C cable. For the Foger Switch Pro 30K Kit, the cable has a 4-pin magnetic adapter end that snaps onto the bottom of the battery dock. For the Foger Bit 35K, any direct USB-C cable plugs into the port on the bottom of the device. This guide covers what kind of Foger charger you need, the 5V/1A spec, replacement and where to buy, and troubleshooting when charging fails, the charging side of the Foger Vape hardware story.
The Foger Vape Charger — What Kind It Is
The Foger vape charger is technically a USB-C cable with a proprietary magnetic adapter on one end (for the Switch Pro 30K Kit) or a plain USB-C plug (used on the Bit 35K). It is not a separate charging dock, wall plug, or wireless pad; it's a cable. The "Foger vape magnetic charger" search variant refers to the same cable; the magnetic puck is the adapter end, not a different product.
The cable has two ends:
- USB-C end (plugs into any USB power source: wall adapter, laptop, power bank).
- Magnetic adapter end (snaps onto the bottom of the Foger Switch Pro 30K battery dock via gold contact pins).
For the Foger Bit 35K (which has a direct USB-C port on the bottom), the magnetic adapter is not used; you plug the USB-C end directly into the Bit 35K USB-C port.
For the Foger Switch Pro 30K Kit (which has magnetic contact pins on the bottom of the dock instead of a USB-C port), the magnetic adapter is required.
USB-C Plus Magnetic Pin Adapter
The magnetic adapter end is a 4-pin gold contact array, with the same diameter and pin spacing across all Switch Pro 30K Kit units. The adapter is keyed (it only snaps on one orientation) so you can't plug it on backwards.
The cable that ships with the Switch Pro 30K Kit has both ends on it from the factory. If you've lost the included cable, the replacement is sold on the same product family page.
Why Foger Doesn't Use A Standard Cable
The Switch Pro dock has the magnetic connection so the dock can sit on a flat surface and charge from below, with no port to plug into and no cable to bend at the device. The magnetic snap is also why pods slot onto the dock the same way (same contact pin array, different layout).
The Bit 35K, being a direct-charge all-in-one, uses a standard USB-C port. Any USB-C cable works on the Bit 35K; the magnetic adapter is not used on a Bit 35K.
Charger Specs (5V / 1A)
The Foger charger is rated 5 volts at 1 amp output. This is standard slow-charge USB spec, not a fast-charge protocol.
If you plug the Foger Switch Pro into a high-voltage fast charger (65W+ phone chargers, USB-PD wall plugs), the dock detects the mismatch and refuses to charge. This is a safety feature, not a fault. Use the included Foger cable, a 5V/1A adapter, or a laptop USB-C port for charging.
Charge time on a fully drained Switch Pro dock is roughly 45 minutes from 0% to 100% on the rated 5V/1A specification.
Ship same-day from the authorized US store — all flavors in stock, 30-day defect coverage, free shipping over $80.
Foger Bit 35K
All-in-one disposable. 35,000 puffs.
Foger Switch Pro 30K Kit
Battery + pod bundle. Swap and continue.
Foger Switch Pro Pod
Replacement pod for the Switch Pro 30K Kit.
Foger Diamond Membership
Lifetime 10-20% discount on every Foger order.
How To Charge A Foger Vape The Right Way
Charging differs between the two Foger device families. Pick the right one below.
Switch Pro 30K Kit (Magnetic Dock Connection)
- Take the Foger magnetic charging cable. The magnetic adapter end is the wider, 4-pin gold connector.
- Approach the bottom of the Switch Pro dock with the magnetic adapter — it self-aligns and clicks on. Do not force orientation.
- Plug the USB-C end into a 5V/1A power source (the included adapter, a laptop USB-C port, or a 5V wall plug).
- The OLED screen on the dock displays a charging icon and percentage. Charging is active.
- When the OLED shows 100%, unplug. The Switch Pro is ready.
Approximate charge time: 30–45 minutes from 10% to 100% on the rated 5V/1A spec.
Bit 35K (Direct USB-C Port)
- Locate the USB-C port on the bottom of the Bit 35K (next to the draw mouthpiece on the opposite end).
- Plug any standard USB-C cable into the port. The Bit 35K does not need the magnetic adapter.
- The OLED screen on the front face displays a charging icon and percentage. Charging is active.
- When the OLED shows 100%, unplug.
Approximate charge time: 35-50 minutes from 10% to 100% on a 5V/1A cable. Avoid USB-PD or 65W+ chargers; the Bit 35K accepts them but draws more thermal stress on the integrated battery.
Foger Vape Charger Replacement & Where To Get One
The Foger cable is not sold as a stand-alone SKU on this site; it ships inside the Foger Switch Pro 30K Kit. There are three paths to a replacement depending on what you've actually lost.
Path 1 — Lost the magnetic cable, still have the Switch Pro dock. The fastest in-stock-today path is an authorized vape shop from the Foger Vape Near Me directory. Authorized shops carry the original magnetic cable, and the cable spec is identical across all Switch Pro 30K Kit units. Search your ZIP code and the locator shows charger-in-stock per shop.
Path 2 — No local shop in stock. Open a warranty replacement request through Foger support with your Switch Pro 30K Kit order number or device serial. The support team ships a replacement magnetic cable directly from our warehouse, same-day from order receipt on weekdays.
Path 3 — Bit 35K, lost USB-C cable. The Bit 35K uses any standard 5V/1A USB-C cable. You do not need a Foger-branded cable; any USB-C cable from a phone, laptop charger, or convenience store will charge a Bit 35K. The magnetic adapter is only required for the Switch Pro 30K dock.
Pricing context. A replacement cable is typically processed under the 7-day return window on the original Kit purchase at no charge if the Kit shipped without the cable; outside that window, the charge is the cost of a single cable plus US ground shipping. Public coupon codes on Today's Deal apply against new Kit orders at checkout but not against warranty replacements.
Counterfeit chargers. Third-party "Foger compatible" magnetic chargers in the $5-$10 range on marketplaces are typically counterfeit and present a fire risk on the Switch Pro dock. The 4-pin spacing is reproduced correctly, but the voltage regulation is not; they can over-deliver voltage past the 5V/1A spec and trip the dock's safety lockout permanently. Verify any charger purchase against authentic Foger sourcing before plugging it into a Switch Pro dock.
Note: some users search for a "Foger battery charger" expecting a separate cradle that charges an external battery. There is no removable battery on either Foger device; the cell is integrated, so the charger plugs into the device itself. For battery capacity, charge cycle expectations, and what to do when the cell will not hold charge anymore, the Foger Vape Battery Guide covers the device-side battery question separately from the cable question covered here.
Foger Charging Dock vs. Magnetic Cable — Same Thing
A common search confusion: some users search "Foger vape charging dock" expecting a separate cradle product. There is no separate dock; the "dock" in this context is the magnetic adapter on the Foger charging cable.
When buyers say "Foger charger dock" or "Foger vape charging dock" they're referring to:
- The 4-pin gold magnetic adapter end of the Foger charging cable (which is what plugs into the bottom of the Switch Pro 30K battery dock — note: the device has a "dock" name; the cable has a "magnetic adapter").
The Foger product family does not include a stand-alone charging cradle. There's no separate base or wireless charging pad. Buying the "Foger magnetic charger" SKU is buying the cable; the magnetic end is what connects.
Where To Buy A Foger Magnetic Charger Online & Near You
Two paths:
Online: Order directly from the Foger site (this domain). Same-day US shipping. Use the public coupon code on Today's Deal at checkout for current discount.
Near you: Foger magnetic chargers are stocked at authorized vape shops listed on the Foger Vape Near Me directory. Search your ZIP code on the locator and the results show charger availability per shop. Authorized shop carry the same cable as the Foger online store; they don't carry counterfeit chargers.
Some search queries ask "Foger vape magnetic charger nearby." The near-me directory is the right path for in-stock-today inventory. Direct-from-site is the path if you want to confirm a known-good cable with a tracked shipment. (Shoppers also reach the charger page searching Fogger Vape, the alt spelling TK creators default to because the platform's brand-name filter throttles "foger" on the actual handle; the Fogger flavors menu they tag is the same Foger lineup, and the magnetic charger is the same cable whichever way they spell the brand.) For the catalog of flavors that ride on this dock, the Foger Vape Flavors hub covers the lineup; the Foger Vape Pods page covers per-pod pricing once the dock is in your hand.
Charging Without The Battery / Switch Pro Power Bank Note
Some users search "how to charge Foger vape without battery." The short answer is you can't charge a Foger device without its battery, because the battery is integral to the hardware (Bit 35K is sealed, Switch Pro dock contains the rechargeable cell).
The phrase "without battery" comes from a different scenario: the Switch Pro Kit listing says "not include battery" because the pod listing (without dock) is sold separately from the Kit (with dock). If you're buying just a Switch Pro 30K replacement pod, you need to already own a Switch Pro 30K Kit (which has the rechargeable battery dock).
There is no "battery-free" Foger vape; the device requires its own internal battery to fire the dual-mesh coil. The "power bank" language in user reviews refers to the Switch Pro dock acting as a rechargeable supply for pods over many flavor cycles, not a USB power bank for other devices.
If you don't have a Switch Pro 30K Kit yet, the Kit listing includes the battery dock plus first pod.
Charger Troubleshooting (Pocket Lint, Over-Voltage, Bad Cable)
If your Foger isn't charging, the issue is typically one of three things. Check in order:
- Pocket lint or debris on the magnetic adapter pins. The 4-pin gold contact array on the magnetic adapter picks up lint, dust, or residue from pockets and bags. Wipe both the cable adapter and the bottom of the dock with a dry cloth (or a Q-tip with isopropyl alcohol if visibly dirty), reconnect, and try again.
- High-voltage charger lockout. If you've connected a 65W+ phone charger or a USB-PD adapter, the dock's safety circuit blocks charging. Switch to the included 5V/1A Foger adapter, a 5V/1A wall plug, or a laptop USB-C port. The dock should resume charging within 5 seconds of switching.
- Damaged or counterfeit cable. If the cable shows physical damage (kink, fray, magnetic adapter loose) or you suspect it's a third-party counterfeit, replace with an authentic Foger cable. Counterfeit cables can deliver wrong voltage and damage the dock. Verify cable authenticity on the Foger Authenticity page.
If charging still fails after all three checks, the issue is on the device side (battery cell or charging IC), and the device may need a warranty replacement. Foger support contact info is on the contact page.